It belonged to a technician I’ll call Gareth: fifteen years on petrol and diesel at an independent garage outside Stoke, a decent reputation for sorting the intermittent faults other people gave up on, and a top line that read “Experienced mechanic seeking a new challenge.” Below that came a list. Servicing, MOT preparation, clutches, cambelts, diagnostics.
The Level 3 electric and hybrid vehicle course he’d finished in the spring was at the bottom, under a heading called “Other”, next to his driving licence.
He was applying for a technician role on a main dealer’s EV team and for a job at an independent workshop that now sees mostly battery cars and plug-in hybrids. Neither application had gone anywhere. Nobody rang him back. His experience was solid, and the qualification was exactly what those adverts asked for, but a workshop controller skimming forty CVs on a Friday afternoon was never going to scroll down as far as “Other”.
Fifteen years of fault-finding is the strongest thing on the page
A lot of what an EV workshop needs from a technician has little to do with the battery. Cars still arrive with knocks, suspension wear, brake judder (some EVs suffer more from it, because regenerative braking leaves the discs barely used and prone to corrosion), cabin heating complaints, software faults and a dashboard lit up like a fruit machine. The high-voltage side is where the safety training matters, but the bulk of the job is diagnosis: reading data, ruling things out in a sensible order, and explaining the result to a customer who is cross about it.
Gareth had done that for fifteen years. His CV didn’t say so in a way anyone could measure.
Recruiters in the trade want results bullets, and a results bullet for a technician has three parts: what the job was, how you went about it, and what changed because of you. “Diagnostics” is a word. “Traced a recurring CAN bus fault on a fleet of six delivery vans to a chafed loom behind the bulkhead, ending three months of repeat visits” is evidence. The second version tells an EV workshop that you read wiring diagrams, think in systems and stick with a problem, which is most of what an electrified drivetrain asks of you.
Think about the hands-on EV and hybrid work you’ve already done, even if it was small. Hybrid servicing counts. Changing the twelve-volt battery on a plug-in hybrid counts if you followed the manufacturer’s procedure. Assisting a colleague with a high-voltage isolation counts if you say plainly that you assisted. Handling a damaged battery module under supervision during your course counts, labelled as course work. Inflate none of it. Workshop managers who run EV bays have heard “extensive EV experience” from people who once topped up the washer fluid on a Leaf.
Building it in Quillbot over a cup of tea
Gareth didn’t want to spend a weekend fighting a word processor, which is fair enough. We used Quillbot’s ai resume builder, which works in four steps: enter your career details, generate content with AI, customise the layout and content, then download.
There are a few ways in. You can import LinkedIn profile data, upload your existing CV file, paste experience from another document, or start from a blank page. Gareth uploaded the folded CV (we scanned it first; a clean digital copy is better if you have one) and then rewrote each job section by typing out, in ordinary language, what he actually did all day.
That second part is where the tool earns its keep. You describe a role, your responsibilities and any achievements the way you’d tell a mate at the pub, and it turns that into concise, results-focused bullets. It will also draft a professional summary for the top of the page. The summary is the bit most technicians skip or get wrong, so let the AI produce a first go and then correct it.
For layout he chose the ATS-friendly template. There are five styles (student, professional, minimalist, creative and ATS-friendly), and you can adjust colours, fonts, spacing and which sections appear. Large dealer groups often push applications through an applicant tracking system before a human sees them, and the builder’s page describes its layouts as “parse-safe”: standard section headings, clear organisation, consistent formatting. The same page is straight with you that no builder can guarantee passing every ATS screen. I’d repeat that to anyone promised otherwise by any tool.
The output is a focused one-page CV. When you’re happy, you download it in high resolution without a watermark, and you can come back later and export a new version when you finish your next course or change jobs. It’s free to use, with a Premium plan if you want more. The page itself advises reviewing the AI-generated content for accuracy before you apply, and for a technician that advice matters more than usual: if a bullet claims you did a live-working task you aren’t qualified for, a dealer will find out within your first week.
The plain description he typed in
This is close to what Gareth pasted for his current job, typos tidied:
Independent garage, 15 years. All makes, mostly Ford, Vauxhall, VW group, some Toyota hybrids. I do the hard diagnostic jobs the other two techs pass to me. Did a lot of the fleet work for a local florist and a plumbing firm, about 20 vans between them, kept them on the road. Started doing hybrid services on Priuses and Auris about 4 years ago, maybe 2 a week. Finished IMI Level 3 electric/hybrid course in April. Mentor the apprentice. Customers ask for me by name.
And this is roughly what came back after he’d generated, edited and generated again:
- Diagnosed and repaired complex electrical and drivability faults across Ford, Vauxhall and VW group vehicles, taking on escalated jobs from two colleagues
- Maintained a mixed commercial fleet of around 20 vans for two local businesses, scheduling servicing to keep vehicles off the road for the minimum time
- Carried out routine hybrid servicing on Toyota models for four years, averaging two vehicles a week
- Completed an IMI-accredited Level 3 qualification in electric and hybrid vehicle repair and maintenance (April 2026)
- Mentored a first-year apprentice through routine workshop tasks and safe working practice
Two things to notice. The tool didn’t invent a percentage for the fleet work, because Gareth hadn’t given it one, and it shouldn’t. And “customers ask for me by name” vanished, which annoyed him. We put it back into the summary as “a loyal customer base built over fifteen years,” which is less charming but reads better to a stranger.
Before and after: the summary at the top
Before:
Experienced mechanic seeking a new challenge. Hard working, reliable, good with customers. Full clean licence.
After:
Vehicle technician with fifteen years’ diagnostic experience on petrol, diesel and hybrid vehicles, now holding an IMI Level 3 qualification in electric and hybrid vehicle repair. Known for resolving the intermittent electrical faults other technicians escalate, and for keeping commercial fleet vans on the road. Looking to join an EV-focused workshop or dealer EV team and to progress towards higher-level high-voltage work.
The second one is longer and does a completely different job. “Hard working, reliable” tells nobody anything, since every CV in the pile says it. The new version puts the qualification in the first line, says what kind of technician he is, and states where he wants to go next, which matters because workshop managers like to know whether you’ll want the further training they’re about to pay for.
Translating the old garage
| Old-garage skill | EV-workshop wording | The proof |
|---|---|---|
| “Good at diagnostics” | Systematic fault-finding using scan tools, live data and wiring diagrams | One named fault you traced, and the outcome |
| Hybrid servicing | Routine servicing of hybrid vehicles following manufacturer procedures | How many, how often, which makes |
| Fleet van work | Maintenance planning for commercial vehicles to reduce downtime | Size of fleet and how long you looked after it |
| Mentoring the apprentice | Training junior staff in safe working practices | The apprentice’s progress, if you can state it truthfully |
The right-hand column is the one people leave empty. A bullet without proof is a claim, and EV interviews tend to test claims with “talk me through how you’d make that car safe before you touch it.”
What do EV employers in this trade actually ask for?
Read enough adverts and a pattern turns up, though the emphasis differs by type of employer.
Main dealers want the qualification first. They’ll usually say which IMI level or equivalent they need, and whether you’ll be making vehicles safe for others or working on high-voltage components yourself. They also want evidence that you can follow a manufacturer’s procedure to the letter, because warranty work depends on it, and they’ll often mention their own brand training, which you’d do after joining. A line in your summary saying you’re keen to complete manufacturer training costs nothing, and it gets read.
Independent EV specialists care more about breadth. They see a dozen makes a week, older batteries, cars out of warranty, and owners who came to them because the dealer quote frightened them. Diagnostic stubbornness counts for a great deal here. So does talking to customers about range, charging and battery health in words that don’t sound like a sales pitch.
Fleet operators (delivery firms, utilities, councils, the service arms of the big leasing companies) talk about uptime. They want technicians who treat vehicles as working tools, plan servicing around shifts and keep records properly. Gareth’s twenty vans were his strongest card for those roles, and in his first draft they took up four words.
Everyone wants safe isolation habits, a full licence and some sign that you’ll keep learning, because the cars change faster than the courses do. I’d put the qualification date on the CV too. A Level 3 from this year says something different from one completed in 2019 and never refreshed.
When Gareth tailored his CV for a fleet job, he went back into Quillbot’s ai resume builder, moved the fleet bullet to the top of his current role, regenerated the summary after adding “fleet uptime” to his plain description, and downloaded a second version. Ten minutes, maybe less.
Where these CVs go wrong
Burying the qualification. Gareth wasn’t unusual. It belongs in the summary and in its own Qualifications section near the top.
Overclaiming high-voltage work. If you assisted, write “assisted”. If it was on the course, say so. A dealer’s EV team leader may ask you to describe the isolation procedure step by step at interview, and a vague answer ends the conversation quickly.
Listing every make and model. Nobody needs thirty brands. Name the ones relevant to the job, plus the electrified models you’ve worked on.
Letting the AI keep the fluff. Generated bullets sometimes come back with “dynamic” or “results-driven” in them. Delete those words. Technicians who write like marketing managers make workshop controllers wince.
Two pages of history. The one-page format helps here. Your first garage job in 2009 can shrink to a single line.
Forgetting the tickets you already hold. Air conditioning refrigerant handling, ADAS calibration training, MOT tester status. These still matter on electric cars, and they’re easy to drop when you’re excited about the new qualification.
Adding a photo and your date of birth. UK employers don’t expect either, and the space is better spent on one more line about a fault you fixed or a fleet you kept running. Your home town is enough; nobody needs the full address on a first application.
Questions technicians keep asking me
Should I call it a CV or a resume? In the UK, CV. The tool and plenty of online advice say “resume”, and they mean the same one or two-page document. Job adverts here will ask for a CV, so name your file that way.
Is a Level 3 enough to get hired on an EV team? It depends on the role. Many technician jobs on EV teams accept Level 3 with further training once you’re in, while roles involving work on live high-voltage components often ask for a higher level. Read the advert carefully and state your actual level in plain words so nobody has to guess.
Will the AI make things up about my experience? It works from what you give it, but check every line, which is what the builder’s own page advises. Watch for numbers you didn’t supply and verbs that overstate your part in a job.
Can I use the same CV for a dealer and an independent? You can, though a tailored copy usually does better. Keep one master version and download a separate one for each type of employer, changing the summary and the order of your bullets.
A job for tonight
Find the one fault you’re proudest of from the last two years: the one that took three visits and a wiring diagram the size of a tablecloth. Write four sentences about it in plain English, as if you were explaining it to the apprentice. That paragraph is your best bullet, and right now it’s sitting in your head instead of on your CV.
